Andre Stainless is a reliable manufacturer and supplier of top-notch Stainless Steel 410 Bars located in Singapore, Pulau Ujong. Renowned for their strength, hardness, and impressive wear resistance, SS 410 bars find their place in various industries that demand durability and performance under mechanical stress. Andre Stainless offers 410 bars in different shapes, including round, square, and hex, designed to cater to a wide range of engineering and industrial needs. With a strong focus on quality assurance, timely delivery, and compliance with international standards, Andre Stainless guarantees that each bar delivers consistent performance in environments that require strength, toughness, and moderate corrosion resistance.
Stainless Steel 410 Bars mainly consist of 11.5–13.5% chromium, along with low carbon (≤0.15%) and small amounts of manganese, silicon, phosphorus, and sulfur. As a martensitic stainless steel, 410 boasts impressive mechanical properties, featuring a tensile strength of 480–700 MPa, yield strength of 270–450 MPa, and hardness reaching up to Rockwell C35 when heat-treated. While it may not be as corrosion-resistant as austenitic grades, SS 410 bars perform admirably in mildly corrosive settings. They are magnetic, can be hardened through heat treatment, and showcase high strength, machinability, and resistance to abrasion and scaling.
| Specification | ASTM A479/ SA479 ASTM A276/ ASME SA276 |
|---|---|
| Grade | Stainless Steel 410 (UNS S41000) |
| Hex Bar size | 18 to 57mm (11/16″ – 2-3/4″) |
| Round bar size | OD 4mm to 500mm |
| Square bar size | 18mm to 47mm (11/16″- 1-3/4″) |
| Billet Size | 1/2″- 495mm Dia. |
| Rectangles Size | 33 x 30mm – 295 x 1066mm |
| Bright Bar | OD 4mm to 100mm |
| Tolerance | K12 H12, K10, H9, H11, H8, H13K9, H10, K11, or as per need |
| Flat bar size | 1/2” to 10” in thickness of 2 to 150mm |
| Angle bar size | 3*20*20~12*100*100 |
| Finish | centreless ground, Cold (bright) drawn, hot rolled, peeled, smooth turned, hot rolled annealed, slit rolled edge, Bright, Rough Turned, Grinding, Polish & Black |
| Form | Flat Bar, Hollow, Round, Square, Triangle, Rectangle, Half Round Bar, Rod, T-Bar, Precision Ground Bar, Hex (A/F), Blocks, Channel Bar, Threaded, Round Rod, Billet, Profiles, I/H Bar, Ingot, Rings, Forging etc. |
| Technique | 440C Stainless Steel Hot Rolled, Cold Drawn, Rod, Forged Round Bar, Cold Rolled |
| Condition | annealed, Hardened & tempered |
| Section | 3.0 -12.0 mm thickness, 80 x 40 to 150 x 75mm section |
| Channel Bar | 5.0 – 6.0mm thickness |
| Surface | Bright, Cold Drawn, Hot Rolled Pickled, Sand Blasting Finished, Polished, Hairline |
| Hollow Bar | 32mm OD x 16mm ID – 250mm OD x 200mm ID |
| Grade | AISI | Stainless Steel Bolts & Nuts Chemical Composition (% maxima unless stated) | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| C | Si | Mn | P | S | Cr | Mo | Ni | Cu | ||||||
| 410 | SS 410 | 0.09-0.15 | 1.0 | 1.0 | 0.05 | 0.03 | 11,5 – 14,0 | – | 1 | – | ||||
| Type | Tensile Strength | Yield Strength (0.2% offset) | Elongation in 2” (50.80mm) % | Hardness (Rockwell) | ||
|---|---|---|---|---|---|---|
| Ksi | MPa | Ksi | MPa | |||
| 410 | 70 | 483 | 45 | 310 | 25 | B80 |
Contact us to get a quick quote for your requirement.
We ensures that all 410 stainless steel panels are rigorously tested for quality, strength and durability. Each product is certified to appropriate industry standards, including mechanical components, corrosion resistance and finishes. These certifications assure reliable performance and compliance with global quality standards in industrial applications.
Corrosion-resistant and heat-treatable, Stainless Steel 410 Round Bars are available in diameters from 0.5″ to 12″. They are ideal for applications in cutlery, automotive parts, and industrial components requiring high hardness and moderate corrosion resistance.
Stainless Steel 410 Flat Bars offer high strength and good machinability, with thicknesses from 0.25″ to 6″ and widths up to 12″. Suitable for manufacturing tools, hardware, and parts that need durability and wear resistance.
Corrosion-resistant Stainless Steel 410 Square Bars are available in sizes from 0.5″ to 6″ on each side. They are used in applications requiring high hardness and resistance to wear, such as in industrial machinery and components.
Stainless Steel 410 Rectangular Bars provide high strength and corrosion resistance, available in sizes from 0.5″ x 1″ to 6″ x 12″. Ideal for heavy-duty applications, including parts and tools that need excellent durability and wear resistance.
Offering good corrosion resistance and machinability, Stainless Steel 410 Hexagonal Bars come in sizes from 0.5″ to 4″ across flats. Suitable for use in hardware, machinery, and parts that require strength and durability.
Corrosion-resistant Stainless Steel 410 T-Bars are available in dimensions from 0.5″ x 0.5″ to 6″ x 6″. They are ideal for structural and industrial applications where high hardness and wear resistance are needed.
Stainless Steel 410 Bars are extensively utilized in applications that require a blend of strength, hardness, and moderate corrosion resistance. These bars are frequently found in the production of fasteners, pump shafts, turbine blades, cutlery, valves, and machine components. They’re particularly well-suited for industries like automotive, oil and gas, aerospace, and power generation, where maintaining structural integrity is essential. Their exceptional wear resistance also makes them ideal for tools and mechanical parts that face friction. Andre Stainless provides SS 410 bars in various sizes and finishes, catering to both standard and custom requirements.
©2024 Andre Stainless All Rights Reserved.
